RUGGED Tab 10 N5100 Entry - 10" industrial tablet

Robust industrial tablet

The RUGGED Tab 10 N5100 Entry is equipped with an Intel® Celeron N5100 CPU, 8GB RAM and a 128 GB SSD. The robust housing with passive cooling is paired with an extended temperature range and some extensions. The system can be used in industry and logistics, but also in vehicles or in retail.
-20°C UP TO +60°C-20°C UP TO +60°C
4G MODULE4G MODULE
FANLESSFANLESS
GPS MODULEGPS MODULE

CPU 1 CPU

Intel® Celeron® N5100, 4x 1.1 GHz

Graphics card 3 Graphics card

SSD / HDD 4 SSD / HDD

Expansion 5 Expansion

Operating system 6 Operating system

Add-Ons 7 Add-Ons

Warranty 8 Warranty

920,00

Your configuration

Vehicle mount, barcode scanner and many connections

An additional backup battery can be purchased for use cases in which the tablet is not near a charging station. An optional 2D barcode scanner is available for retail or logistics. If you use the RUGGED Tab on the move, for example on construction sites or in a forklift truck, you can also purchase a vehicle mount. A docking station is also available as an accessory.

The RUGGED Tab 10 N5100 Entry has two USB ports, as well as an HDMI 1.4a port that can play content in a resolution of 4K. The display has a size of 10.1″ with a resolution of 1920×1200 pixels. The tablet has a front camera with 5MP and a rear camera with 8MP.

Technical data

Warranty overview Tablets

System
CPU Intel® Celeron® N5100 (FCBGA1338, 4 cores)
GPU Intel® UHD Graphics
RAM Onboard 8GB LowPower DDR4X
SSD / HDD Onboard 128 GB eMMC

 

I/Os
Front 1 x mini HDMI 1.4a

1 x USB 3.1 gen 2×1 type C

1 x LINE-Out

1 x USB 3.0

Back 1 x Gigabit LAN

1 x microSD card slot

1 x SIM card slot

 

 

Environment / Mass
Dimensions (W x D x H) 274.9 mm x 188.7 mm x 23.1 mm
Ambient conditions (operation) -20°C to +60°C
Cooling passive
Idle power consumption in W 10.3

 

Extensions
M.2 KeyM 2280

KeyM 2280

KeyE 2230

WiFi Intel® Wireless-AC 9461
Bluetooth Bluetooth 5.1
4G module MEIG SLM750
GPS module uBlox NEO-7M-0-000

 

Display
Size (inch) 10.1
Resolution 1920 x 1200 (WUXGA) // 16:10
Viewing angle (L,R,H,L) 85° / 85° / 85° / 85°
Brightness (cd/m²) 400
Panel type / Backlight IPS/ LCD
Further information 10-point multi-touch

 

Miscellaneous
Operating system Windows 10 / 11
Battery capacity 5000 mAh / 7.6V
PSU 19 V / 3.42A (docking station)
Standards & certificates IP65 Waterproof & Dustproof

MIL-STD-810G certified

CE

Class A warning The device is intended for use in industrial environments. Operation of this device may cause radio interference in residential areas.
Warning for 802.11a use If you want to use the WLAN module according to 802.11a in the 5 GHz range: Use in the 5150 MHz – 5350 MHz frequency range is only permitted indoors!
Mehr anzeigen

Consulting at your side

Christopher Adam

Key account

ca@spo-comm.de
+49 911 239837-16
+49 151 681 99507

Martin Wiesneth

Product Manager

mw@spo-comm.de
+49 911 239837-34

RUGGED Tab 10 N5100 Entry - 10" industrial tablet

spo-comm

Produktinformationen

Nachdem Sie Ihre Daten im Formular eingegeben haben, wird Ihnen der Preis für das gewählte Produkt direkt angezeigt. Wenn Sie bereits einen Account bei uns haben, melden Sie sich bitte an, um die Preise aller Produkte zu sehen.

Direkte Preisauskunft

8 + 7 =

RUGGED Tab 10 N5100 Entry - 10" industrial tablet

spo-comm

Produktinformationen

Nachdem Sie Ihre Daten im Formular eingegeben haben, wird Ihre Teststellungsanfrage mit Ihrer gewünschten Konfiguration an uns übermittelt. Die Teststellung ist für 30 Tage kostenfrei und räumt Ihnen ein 30tägiges Rückgaberecht ein. Sie bekommen hierzu noch separat eine Nachricht durch einen unserer Mitarbeiter. 

Rahmenbedingungen

Testzeitraum

  • Das Gerät wird dem Kunden zu Testzwecken für einen Zeitraum von 30 Tagen, jeweils ab Zustellung, kostenfrei zur Verfügung gestellt.
  • Im Bedarfsfall kann dieser Zeitraum nach Rücksprache mit uns verlängert werden.

Rechnungsstellung

  • Falls Ihre Tests positiv verlaufen, stellen wir Ihnen eine Rechnung und Sie behalten das Gerät.
  • Sollte nach Ablauf des Testzeitraums keine Rücksendung oder zumindest eine Information. bzgl. der weiteren Vorgehensweise erfolgt sein, so werden die Geräte in Rechnung gestellt.
  • Eine Rücknahme ist nach Rechnungsstellung ausgeschlossen.
  • Bei Rechnungsstellung wird der in der Auftragsbestätigung aufgeführte Betrag fällig.

Rücksendung

  • Eine kostenfreie Rücknahme der Teststellung erfolgt nur bei einwandfreier Betriebsfertigkeit (wie Auslieferzustand) und ohne jegliche optische Veränderung bzw. Beschädigung.
  • Die Rücksendung der Teststellung muss im Originalkarton erfolgen.

Entschädigung

  • Bei Fehlen oder Beschädigung des Originalkartons, bei Beschädigung des Testsystems (z.B. durch Kratzer), bei Fehlen von Zubehör bzw. gelieferten Komponenten behalten wir uns das Recht vor eine Aufwandspauschale in Höhe von mind. 20% des in der Auftragsbestätigung aufgeführten Betrages zu erheben.
  • Bei Vorinstallation eines Betriebssystems durch die Fa. spo-comm GmbH und Nichtabnahme der Teststellung wird eine Installationspauschale von 25,00 € netto in Rechnung gestellt.

Teststellungsanfrage

Testing sample conditions
5 * 7 =

Vielen Dank für Ihre Anfrage!

Es ist leider ein Fehler aufgetreten.

RUGGED Tab 10 N5100 Entry - 10" industrial tablet

spo-comm

Product information

After you have entered your data in the form, the price for the selected product will be displayed directly. If you already have an account with us, please log in to see the prices of all products.

Direct price information

13 + 2 =

RUGGED Tab 10 N5100 Entry - 10" industrial tablet

spo-comm

Product information

After you have entered your data in the form, your trial request will be sent to us with your desired configuration. The trial is free of charge for 30 days and gives you a 30-day right of return. You will receive a separate message from one of our employees.

Basic conditions

Testing period:

  • A Test sample is made available to the customer for test purposes for a period of 30 days, from delivery – without charge.
  • In case of need, this period can be extended after consultation with us.

Invoicing:

  • If your tests results are positive, you can simply keep the system and we will send you the invoice.
  • If the system will not return after this period it will be charged, if we did not receive any other information. Already charged test samples will not be accepted on return.
  • Returns are excluded after invoicing.
  • The amount stated in the order confirmation is due when the invoice is issued.

Returning your test sample:

  • The charge free return of test samples is possible to all test samples in perfect condition, without any optical or technical modification.
  • The system has to be returned in the original packaging.

Compensation:

  • In case of return, if the system or original packaging is damaged, if accessories or delivered components are missing, we reserve the right to charge a fee of minimum 20% of the total amount listed in the order confirmation.
  • If the test sample was delivered with a pre-installed operating system a lump-sum amount of 25,00 € ex. TVA will be charged, in case the test sample is not purchased.

Test position request

Testing sample conditions
12 + 5 =